|
|
|
|
|
|
AEM 3" No Weld o2 Sensor Bung
|
List Price: $50.00
Our Price: $39.99
You save $10.01!
|
|
|
AEM's No Weld O2 Sensor Mount allows you to securely mount any standard sized O2 sensor into your exhaust without having to weld in the O2 sensor bung. ! A step drill and a de-burring tool are about all you will need outside of the usual tools to run any wideband gauge or wideband system. The clamp is made from stainless steel to be rust free, and the gasket material is OEM quality.
|
|
|
|
|
|
|
|
|
|
AEM 2.5" No Weld o2 Sensor Bung
|
List Price: $50.00
Our Price: $39.99
You save $10.01!
|
|
|
AEM's No Weld O2 Sensor Mount allows you to securely mount any standard sized O2 sensor into your exhaust without having to weld in the O2 sensor bung. ! A step drill and a de-burring tool are about all you will need outside of the usual tools to run any wideband gauge or wideband system. The clamp is made from stainless steel to be rust free, and the gasket material is OEM quality.
|
|
|
|
|
|
|
|
|
|
AEM 3.5 Bar Map Sensor
|
|
Our Price: $65.00
|
|
|
AEM 3.5 BAR Brass Sensor Kit
3.5 BAR / 50 PSIa MAP Brass Sensor Kit. Brass Sensor Body. 1/8" NPT Male Thread.
|
|
|
|
|
|
|
|
|
|
AEM Short Ram Intake 94-01 Integra RS/LS/GS
|
List Price: $135.00
Our Price: $107.00
You save $28.00!
|
|
|
AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them.
During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.
|
|
|
|
|
|
|
|
|
|
Fuel Rail for Acura Integra 1994-2001
|
|
|
AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and the ends of each rail are pre tapped to accept -6 AN or 9/16”x18 fittings for users who want to use custom fuel lines.
This product fits the following vehicles:
# 1994 to 2001 Acura Integra GSR 1.8L VTEC
# 1994 to 2001 Acura Integra RS, LS, GS 1.8L
|
|
|
|
|
|
|
|
|
|
AEM Fuel Pressure Regulator for Acura Integra 1994-2001
|
|
|
Honda / Acura Adjustable Fuel Pressure Regulator
AEM's Honda/Acura Adjustable Fuel Pressure Regulators are capable of supporting enough fuel flow for engines up to 1000 horsepower. Our patented interchangeable discharge ports enable the regulator's output to match the output of any fuel pump. AEM includes a custom barb fitting to accommodate the factory fuel hose and the base of each regulator is tapped to accept a -6 AN or 9/16”x18 fittings.
This product fits the following vehicles:
# 1994 to 2001 Acura Integra GSR 1.8L
# 1990 to 1993 Honda Accord DX, LX, SE, EX 2.2L 4 Cyl
# 1992 to 1995 Honda Civic DX, LX 1.5L
# 1992 to 1995 Honda Civic EX, Si 1.6L VTEC
# 1999 to 2000 Honda Civic Si 1.6L VTEC
# 1992 to 1995 Honda del Sol S 1.5L
# 1992 to 1995 Honda del Sol Si 1.6L SOHC VTEC
# 1994 to 1997 Honda del Sol VTEC 1.6L DOHC VTEC
# 1992 to 1996 Honda Prelude F22
# 1988 to 1991 Honda Prelude Si 2.1L
|
|
|
|
|
|
|
|
|
|
AEM Analog 30-35 psi Boost/Vacuum Gauge
|
|
Our Price: $139.00
|
|
|
Adjustable back lighting (7 Colors), Includes black and silver or white interchangeable bezels, Includes AEM 35psi brass sensor WHAT IT DOES AEM's Boost gauge unites unsurpassed accuracy, speed and control with an easy to read, analog interface. The AEM analog gauge also offer a 0-5v analog output for use with data loggers and virtually any engine management system. The Boost gauge features a AEM 35psi brass sensor, making it among one of the fastest and most accurate gauges available. The back lighting is user adjustable to 7 colors, allowing users to easily match the Boost gauge to most factory gauge clusters. Each gauge comes with interchangeable black & silver bezels and is available in black or white gauge face plates.
|
|
|
|
|
|
|
|
|
|
AEM Short Ram Intake 90-93 Integra (All-Trims)
|
List Price: $181.00
Our Price: $144.00
You save $37.00!
|
|
|
AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them.
During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.
|
|
|
|
|
|
|
|
|
|
AEM Short Ram Intake 94-01 GSR
|
List Price: $183.00
Our Price: $145.00
You save $38.00!
|
|
|
AEM Short Ram intake systems are an economical alternative to our Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. Our Short Ram intakes install easily under the hood and cost less because we use less material to manufacture them.
During the development process, we found certain applications respond favorably to shorter inlet lengths over our longer Cold Air designs. For these applications (denoted in the search results page), we offer a Short Ram system only. We perform extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.
|
|
|
|
|
|
|
|
|
|
AEM Tru-Time Cam Gear for Acura Integra GSR 1994-2001
|
|
|
This product fits the following vehicles:
# 1990 to 1993 Acura Integra GSR 1.7L
# 1994 to 2001 Acura Integra GSR 1.8L
# 1990 to 1993 Acura Integra RS, LS, GS 1.8L
# 1994 to 2001 Acura Integra RS, LS, GS 1.8L
# 1999 to 2000 Honda Civic Si 1.6L VTEC
# 1994 to 1997 Honda del Sol VTEC 1.6L DOHC VTEC
# 1992 to 1996 Honda Prelude H23
# 1988 to 1991 Honda Prelude 2.0L 4 Cyl
# 1988 to 1991 Honda Prelude Si B20 and B21
|
|
|
|
